HD380 US Issue 01
5
TLC-30 eco
2 LOCATION AND INSTALLATION
Only use the mains Power Supply Unit supplied with the
product. Use of a different mains power supply may cause a
safety hazard and will invalidate any guarantee.
Plug the TLC-30 power cable connector into the PSU cable
connector.
Plug the mains power cable into the socket on the PSU. Ensure
it is pushed fully home in its socket.
Place the PSU and mains cable in a convenient, dry location
off the floor and away from animals.
Your TLC-30 will give best results in a heated room free from
wide temperature variations and with generous ventilation
particularly if several incubators are running at the same time.
Ideally thermostatically control the room at between 68 and
77°F (20-25°C). For best results don’t allow the room
temperature to drop below 59°F (15°C).
TLC-30 Intensive Care Units may be stacked (maximum 2 units
high). Ensure the feet of the top unit lock over the ‘stacking
posts’ on the top of the other unit.
TRANSPORT OF ANIMALS
The TLC-30 may also be used while attended to allow
transport of animals in a vehicle. Connect to a 12 volt
accessory socket (or cigarette lighter) using adaptor lead part
number 15.45 available from Brinsea Products. It is safest to
transport the unit firmly secured in the luggage
compartment or firmly secured on the vehicle floor ensuring
it cannot interfere with the operation of any vehicle controls.
The driver must not be distracted by the animals or TLC-30.
Power Supply
Unit (PSU)
Mains Power Cable
TLC-30 Power Lead
PSU Lead