Brinsea Maxi II eco, Руководство по эксплуатации, Страница: 6 / 13

6
AC25 US Issue 01
1 SETTING UP YOUR INCUBATOR
LOCATION AND INSTALLATION
Your incubator will give best results in a heated
room free from wide temperature variations and
with generous ventilation – particularly if several
incubators are running at the same time.
Ensure that the room temperature cannot drop on
a cold night. Ideally thermostatically control the
room at between 68 and 77°F (20 and 25°C). Never
allow the room temperature to drop below 63°F
(17°C).
Make sure that the incubator cannot be exposed to
direct sunlight and is used on a flat, level surfaced
worktop or table, not on the floor.
Connect the mains power cable to the power supply
unit and connect the power supply unit cable to the
incubator lid. Ensure each connector is pushed fully
home in its socket.
Only use the power supply unit supplied with the
product. Use of a different power supply may
cause a hazard and will invalidate any guarantee.
1.
2.