EN_A2 301-0116-01
Motion Detector
Before You Start
2
Package Contents
1
MAS200
User Manual
www.brinno.com
Take motion sensor unit out of door knocker casing.
1. Remove knocker ring.
Open front cover.
2. Open the front cover.
3. Take out
motion sensor unit.
Complles with
IMDA Standards
N4232-17
4
Activate Motion Sensor
3
Device Parts
Display Icons
5
6
Sensor Installation
1. Door Knocker Casing
2. Motion Sensor Unit
(Inside knocker casing)
3. Receiver Unit
4. Magnetic Wall Mount
5. Screwdriver
6. Battery Lock*
(Inside motion sensor unit)
7. 1 CR2450 Battery
(Inside motion sensor unit)
Receiver Unit:
For Camera:
For Motion Sensor Unit:
Motion
Sensor
Motion
Sensor
1
2
3
4
5
6
CR2450
7
2
3
1
1
2
4
5
1. Connected sensors:
The icon turns white to indicate the device is
successfully connected to the sensor.
Door Knocker Mode:
Insert motion sensor unit into door knocker casing
included in the package.
Portable Mode:
Hide motion sensor unit anywhere separately near
your front door.
1
2 3
4 5 6
Motion sensor unit
1
1
2
3
4
5
3
Motion Sensor Unit:
1. Motion Sensor Lens
2. Battery Compartment
3. Motion Sensor Pairing Channel Switch
4. Pairing Button
5. LED Indicator
* Keep battery out of reach of children. Install battery
lock to prevent children from swallowing battery.
2
1. Connector
2. LED Indicator
1
2 3
4 5 6
1
2 3
4 5 6
2. Sensor in low battery:
The icon turns red to alert battery dropping low.
Wait 30 secs for the sensor to be
auto paired. Motion sensor icon
will appear on the camera LCD
once activated.
Insert receiver unit.
Turn on power.
If you choose to set up a multiple motion sensors
environment and purchase additional motion sensor
units, please refer to Multiple Sensors Part below for
full details.
Remove tab and engage
battery to activate motion
sensor.
