1017059
-A
12
INSTALLATION
================================================================================================
CAUTION:
Avoid injury! Before installing sprayer, make sure
the vehicle is parked safely.
SPRAYER INSTALLATION
1. Park machine safely. (See vehicle manual.)
2. Align the sprayer insert tube with the receiver.
3. Install Hitch Pin (44) through the sprayer’s insert tube and
the receiver. Secure the Hitch Pin with Hairpin Cotter (48).
======================================================
SPRAYER REMOVAL
NOTE: Refer to the illustration above when working
through the steps in this section.
1. Park machine safely. (See vehicle manual.)
2. Unload sprayer tank before disconnecting from vehicle.
3. Remove the hairpin cotter and the hitch pin.
4. Pull the tank out of the receiver.
5. Install the hitch pin and hairpin cotter in the sprayer hitch
tube for storage.
44
48
CAUTION:
Avoid injury! Keep body parts away from
underneath tank.
ELECTRICAL CONNECTION INSTALLATION
1. Select the proper tools to remove the leads to the battery
terminals.
NOTE: If you do not have insulated tools, use
electrical tape to wrap all exposed non-working
surfaces of the tools. It is important to take steps to
reduce the risk of causing an electrical spark.
2. Put on gloves and eye protection.
3. Verify that the red lead is attached to the positive (+)
battery terminal and the black lead is attached to the
negative (-) battery terminal.
4. Attach the red lead (with the fuse) of the Battery
Connecting Wiring Harness (41) and the red lead from
your engine to the positive (+) battery terminal.
5. Using the Battery Connection Wiring Harness (41) attach
the black lead of the Battery Connection Wiring Harness
(41) and the black lead from your engine to the negative (-)
battery terminal.
NOTE: The Battery Connection Wiring Harness (41)
contains a 15 amp blade-type fuse.
Operator’s seat
Recommended anchor points for zip ties
(drilled holes in weldment under opreator’s seat).
NOTE: Ensure that both battery terminals and battery
leads do not make contact with seat. Use enclosed
zip tie (43) to secure the Battery Connection Wiring
Harness (41). See picture above for recommended
location for zip tie anchors.
CAUTION:
Avoid injury! Care should always be used when
working around batteries.
Use insulated tools when making battery connections.
Heavy gloves and eye protection should be worn when making
battery connections.
Insert Tube
SCALE 1.000
