10
1019101-C
English Manual
================================================================================================
ASSEMBLY
6
5
26
16
6
5
Step 3-C
Position one
or two washers (
16
or
26
)
as needed to eliminate any
side-to-side movement
and push Axle Assembly (
6
)
through hole in the left End
Panel (
5
) as far as
possible.
See layout below.
IF LOOSENESS
EXISTS,
use
additional 5/8"
Thick or Thin
Washers (16 or 26)
inside the
End Panel to
eliminate any side
movement.
NOTE: Tines must not move from side to side inside opening of end panels.
Step 4-A
Slide the Handle Grip (
10
) on to the Handle Assembly (
8
) as illustrated.
10
8
