background image

1019099-F

15

English Manual

================================================================================================

OPERATION

CAUTION: AVOID INjURY: 

Excessive towed load can cause loss of control on slopes.  

Stopping distance increases with speed and weight of the towed load. Total towed weight must 

not exceed combined weight of towing vehicle, ballast and operator.

DEPTH / PENETRATION

-  Weight should be added to tray after installing  

to the towing machine. Weight should be secured by 

rope, straps, or other suitable means to contain the 

weight in the tray.

-  Weight tray maximum capacity = 150 pounds.

-  Moderate soil moisture is  

important for proper penetration. 

-  Extremely dry conditions will not permit penetration 

and may damage the tines. Extremely wet conditions 

will cause full pene-tration to the tine spacers. This 

condition will cut slots in the turf.

SPEED

The best operating speed 

is 3 mph or less.

FREqUENCY

Aeration is not accomplished in a single pass. It will 

normally take several passes over the lawn. Alternating 

the direction by 90° will improve the aeration effect.
The aerator may be used in an independent operation or 

may be used when mowing your lawn.

CAUTION: AVOID INjURY! 

Keep body parts away 

from under drawbar. Do not disconnect aerator from 

the towing vehicle with weight on the tray.

USING THE WEIGHT TRAY

The following maximum loaded weight capacity is the 

weight of the aerator plus the weight loaded in the tray:

MODEL 

WEIGHT CAPACITY

SAT2-40BH-S 

42 lbs. (Empty)

   

150 lbs. (Max Load)

   

192 lbs. Max Towed Weight 

Towing capacity will vary with weight of towing vehicle 

and operator. Add the weight of your machine to operator 

weight to find the maximum capacity for towing.

SPEED 

LIMIT 

 

3

Содержание SAT2-40BH-S



















Отзывы: