6
L-1681BH-K
3
1
8
4
10
7
7
11
3
2
ASSEMBLY
================================================================================================
Assembly Step 1
Attaching the Scraper Bar
Add a 5/8” flat washer (
7
) to the
Roller Drum (
2
) as illustrated.
Slide a square bearing (
10
) into
the large square hole at the end of
the Scraper Bar (
3
) and add to the
Roller Drum.
Add another 5/8” flat washer (
7
).
Secure everything in place by
sliding a 5/8” E-ring (
11
) into the
slot at the end of the roller drum (
2
).
Hardware Panel A
Repeat this step on the
other end of the drum.
Assembly Step 2
Repeat this step on the
other end of the drum.
Align the Frame Extension Bar (
1
)
as illustrated.
From the outside, run two
5/16 x 1” Carriage Bolts (
4
) through
the Extension Bar (
1
) and Scraper
Bar (
3
) as illustrated.
Secure everything in place with two
5/16” Nylon Lock Nuts (
8
).
Hardware Panel B
English Manual
