L-1884-
E
10.
Figure 5-1. INSTALL WHEELS (METAL)
Note:
The unit will be shiped with one of two
types of wheels. Determine whether the
wheels have metal or composite (plastic)
rims. If the rim is metal, proceed to step
5a. If the rim is plastic, proceed to step
5c.
5a. Attach each Wheel (9) to the Axle (6)
using hardware in the following order:
• One Axle Bearing (7)
• One or two Flat Washer 5/8” (8) - use
one or two as needed.
• One Metal-Rimmed Wheel (9)
• One Flat Washer 5/8” (8)
• One Snapping E-Ring (10)
5b
. Secure Axle to the right wheel by insert-
ing Hairpin Cotter (22) through the wheel
hub and axle. Proceed to step 6a.
Note:
The axle may need to be turned in order
to line up the hole in the axle with the
hole through the wheel hub.
8
Flat Washer 5/8”
Qty. 6
10
Snap Ring E-Type
Qty. 2
15
Axle Bearing
Qty. 2
22
22
Hairpin Cotter
Qty. 1
10 8
8
7
1
22
7
8
8
10
1
9
9
10
9
9
1
6
6
8
7
8
8 10
8
6
RIGHT
WHEEL
LEFT
WHEEL
RIGHT
WHEEL
LEFT
WHEEL
Apply grease to axle
and wheel bearings
Add or delete Flat
Washer (8) to
reduce Axle side to
side movement.
7
ASSEMBLY
