4
Top Housing
Lens
Battery
Changing Battery
Step 1
Remove lens from top housing by
turning lens clockwise.
Step 2
With top housing upside down (solar
panel facing down), push tab on battery
compartment lid and remove the lid.
Step 3
Remove battery. Replace with new
Ni-Cd rechargeable battery.
Step 4
Replace battery compartment lid.
Step 5
Attach the lens by aligning the tabs with
the slots in top housing. Turn
counter-clockwise to lock in place.
NOTE:
These lights utilize L.E.D. (Light
Emitting Diode) technology. There
are no bulbs to replace.
Top Housing
Battery
Compartment Lid
It is important that the solar panel is kept free
of dirt and debris. A dirty solar panel will not
allow the battery to fully charge. This will
shorten the life of the battery and cause the
light to malfunction. Clean regularly with a
dampened cloth or paper towel.
Cleaning
Tabs
IMPORTANT:
The EPA Certified RBRC
®
Battery Recycling
Seal on the nickel-cadmium (Ni-Cd) battery contained in our
product indicates The Brinkmann Corporation is voluntarily
participating in an industry program to collect and recycle
these batteries at the end of their useful life, when taken out
of service in the United States or Canada. The RBRC
®
program provides a convenient alternative to placing used
Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal
in your area. Please call 1-800-8-BATTERY™ for information on Ni-Cd battery
recycling and disposal bans/restrictions in your area. The Brinkmann Corporation’s
involvement in this program is part of our commitment to preserving our
environment and conserving our natural resources.
INSTR_822-2507 Trad Tier.qxd 12/23/03 9:31 AM Page 5
