7
Terminal
Wire Connector
Changing the Battery
Step 1
Unplug the solar panel cord from light and
remove the light from the mounting bracket.
Turn the switch to the “OFF” position.
Step 2
With the light on its side, unscrew the four
screws in rear housing and carefully separate it
from front housing.
Step 3
Remove the battery from rear housing, being
careful not to pull on wires.
Step 4
Disconnect wires from battery terminals and
remove battery.
Step 5
Connect wires to new battery terminals. Make
sure red (+) wire is connected to red (+)
terminal and black (-) wire is connected to
black (-) terminal.
Step 6
Place new battery in rear housing.
Step 7
Attach the front housing to rear housing using
the four screws that were removed in Step 1.
Step 8
Place light back on mounting bracket and
firmly plug the solar panel cord into the main
housing. Then twist the plug counter-clockwise
to lock into position.
Step 9
Charge in
FULL, DIRECT SUNLIGHT
for
THREE FULL DAYS.
Then turn the switch to
the “AUTO” position. The light will turn on
automatically at night when it detects motion.
Front Housing
Battery
Rear Housing
Contains lead-acid (Pb)
battery. Battery must be
recycled or disposed of
properly.
INSTR-821-7100-0_SL7_Span.qxd 6/25/07 2:56 PM Page 8
