Cleaning Stainless Steel Cooking Grills:
Wash grills with a mild detergent and rinse with hot water before initial
use and as needed. DO NOT use a commercial oven cleaner. For stubborn food residue, use a degreaser and
fiber or brass cleaning brush.
Cleaning Porcelain-Finished Cast-Iron Cooking Grills:
Wash grills with a mild detergent and rinse with hot
water before initial use and as needed. For stubborn food residue, use a degreaser and fiber or brass cleaning
brush. Dry immediately using a soft cloth or paper towels.
Cleaning Heat Distribution Plate:
Heat distribution plates should be cleaned whenever food or grease drippings
accumulate to reduce the chance of flare-ups. Wash heat distribution plates with a mild detergent and rinse with
hot water. Use a degreaser and fiber or brass cleaning brush to remove stubborn food residue. Do not use a wire
brush or metal scraper on porcelain-finished heat distribution plates, as they can scratch or chip the porcelain
finish and promote rusting.
Cleaning the Grease Tray and/or Grease Cup:
The grease tray and/or grease cup (some models) should be
inspected before each grill use to reduce the chance of fire. Remove grease (a plastic spatula works well) and
wash all parts with a mild soap or degreaser and warm water solution.
Question: What causes grill parts to rust and what affect does it have on the grill materials?
Answer:
Rusting is a natural oxidation process and may appear on cast-iron and steel parts. Rust will not affect
the short-term performance of your grill. Stainless steel grill parts will not rust. However, weathering and extreme
heat can cause a stainless steel lid to turn a bronze color. This is discoloration, not rust, and is not considered a
manufacturing defect.
Question: What causes my stainless steel grill lid to discolor and how do I clean my grill lid?
Answer:
Smoke, weathering and high heat can cause a stainless steel grill lid to turn bronze in color. This is not
to be confused with rust and is not a product defect. Machine oils used in the manufacturing process of stainless
steel as well as cooking oils and a dirty grill lid can also encourage discoloration if the lid is not cleaned prior to
grill use. After your grill is assembled, remove the protective PVC film from your grill lid and use a stainless steel
cleaner and soft cloth to remove residual adhesive and oils from the inside and outside of your grill lid. Never use
abrasive cleaners or scrubbers. In addition to the initial cleaning, routine cleaning to remove dirt, grease and oils
will help discourage lid discoloration.
Question: Can I convert my grill from propane gas to natural gas?
Answer:
No, your gas grill is manufactured to exact specifications and is certified for either propane gas or
natural gas use only. For your safety, conversion kits are not available. Any attempt to convert your grill will void
your warranty.
Question: Why does the hose / regulator assembly supplied with my grill not fit the older LP gas tank I’ve
used for years?
Answer:
U.S. Government regulates gas appliances and LP gas tanks. When regulations were changed, the LP
gas tank fittings were updated to ensure compliance. If your LP gas tank does not fit the hose / regulator supplied
with your new grill, the tank is outdated and must be replaced. NOTE: Effective April 1, 2002, all LP gas tanks
sold must include an "OPD" overflow protection device. This internal device prevents the LP gas tank from being
overfilled. Tanks without an OPD valve cannot be refilled.
Question: Sometimes I hear a humming sound coming from my gas regulator. Should I be concerned?
Answer:
The humming sound is gas flowing through the regulator. A low volume of noise is normal and will not
interfere with the operation of your grill. If the humming noise is loud and excessive, you need to purge air from
the gas line or reset the regulator flow limiting device following the Regulator Resetting Procedure under
Connecting LP Cylinder and Hose/Regulator to Grill. This procedure should be done every time a new LP
gas tank is connected to your grill. For help, refer to your owner’s manual or call Brinkmann Customer Service
at 800-527-0717.
FREQUENTLY ASKED QUESTIONS
20
Содержание 810-4905-0
Страница 26: ...25 ProSeries 4905 Assembled...
