BRINKMANN PUMPS Bplogic, Руководство по эксплуатации, Страница: 210 / 291

5 Operating the pump controller
210 bplogic intelligent pump controller 18/02/2021
C
o
n
fi
g
u
ra-
ti
o
n
_
C
o
mmPa
ra
m_
R
e
g
ist
e
r-
0
1
.p
n
g
Fig. 136: Modbus RTU
3. Tap
“
Communication parameters
“
(Fig. 136/1).
 “Configuration – Field bus – Modbus RTU– Communication parameters”
(Fig. 137) opens.
C
o
n
fi
g
_
Mo
d
b
u
s_
C
o
mmu
n
ika
ti
o
n
-
p
a
ra
me
te
rs
-0
1
.p
n
g
Fig. 137: Modbus RTU
4. Check whether the parameter values that are displayed for stop bits, parity and
baud rate (Fig.
137) match the parameter values that are set on the frequency
converter.
5. If the parameter values that are set on the pump controller do not match the
parameter values that are set on the frequency converter, contact customer
service.
5.6.6 Using the PROFINET IO field bus or the EtherNet/IP
field bus
PROFINET IO field bus
The pump controller comprises a PROFINET IO Device option.
PROFINET IO is an Ethernet-based field bus to network decentralised automation
components such as sensors, actuators, drives and pumps.