BRINKMANN PUMPS Bplogic, Руководство по эксплуатации, Страница: 202 / 291

5 Operating the pump controller
202 bplogic intelligent pump controller 18/02/2021
1. Connecting the ethernet properly:

ETH 1 in slot C (Fig. 125/1, M12 connection)

ETH 2 in the service access (Fig. 125/2, RJ45 connection)
The ETH-2 connection in the service access is used for temporary
access for service and maintenance purposes. As long as the
cover on the service access is open, housing protection category
IP65 is removed.
2. In
“Configuration”
, tap
“Network”
.
 “Configuration – Network”
(Fig. 126) opens.
Fig. 126:
“Configuration – Network”
3. In
“Configuration – Network”
, select the required connection by tapping:

Ethernet 1 (M12)

Ethernet 2 (RJ45)
 “Configuration – Network – Ethernet 1 (M12)/Ethernet 2 (RJ45)”
(Fig. 127)
opens.