36
Renovent Excellent
Chapter 11
Electric connections accessories
3309"Eqppgevkpi"gzvgtpcn"uykvej"eqpvcev"*qpn{"rquukdng"hqt"Tgpqxgpv"Gzegnngpv"Rnwu+
An external switch contact (e.g. switch or relay contact) can be connected to the Renovent Excellent Plus. This external switch contact
can be connected to connections no. 1 and no. 2 of 9-pole connector X15; this 9-pole connector is directly accessible at the rear of
the top without having to dismount the display cover (see also §11.1).
If a second input is required as external switch contact, if necessary connections no. 3 and no. 4 of the 9-pole connector X15, which
as standard are preprogrammed as 0-10 volt input, can be reprogrammed as second input switch contact. Changing parameter 21
htqo"Ð2Ñ"vq"Ð3Ñ"yknn"vwtp"vjku"2/32"X"kprwv"kpvq"cp"kprwv"ocmg"eqpvcev0""Yjgp"wukpi"vyq"uykvej"kprwvu."uykvej"eqpvcev"3"*Z37/3"("Z37/4+"
always takes priority over switch contact 2 (X15-3 & X15-4).
E2367-B
Oqfkh{kpi"rctcogvgt"3:"gpcdngu."yjgp"enqukpi"vjg"kprwv"gzvgtpcn"uykvej"eqpvcev"3"Z37/3"cpf"Z37/4."Ýxg"fkhhgtgpv"ukvwcvkqpu"hqt"vjg"
gzvtcev"hcp"vq"dg"ugv="fgrgpfgpv"qp"vjg"ugvvkpi"qh"rctcogvgtu"3;"cpf"42."vjg"uwrrn{"cpf"gzvtcev"hcpu"ecp"twp"cv"xctkqwu"Þqy"tcvgu"
*jkijguv"Þqy"tcvg"ku"ujqyp"qp"vjg"0
When connections X15-3 and X15-4 are programmed as switch input 2, parameters 24, 25 and 26 can be used to set the various
ukvwcvkqpu"vjg"ucog"cu"hqt"eqpvcev"kprwv"30"Yjgp"enqukpi"eqpvcev"kprwv"4."vjg"fkurnc{"ujqyu"vjg"vgzv""ÐEP4Ñ0
1) Bypass conditions opening valve: - outdoor temperature is higher than 10°C.
- temperature from atmosphere is at least lower than temperature from dwelling.
- temperature from dwelling is higher than the preset bypass temperature (parameter 5).
A = Renovent Excellent Plus
B = Plus version control board
C = Contact connected to switch input 1; for
instance a switch or a relay contact
D = Display Renovent Excellent Plus (text
“CN1” appears when contact C is clo-
sed.)
Setting
Parameter 18
Function conditions
Situation supply fan extract fan
Setting parame-
ters 19 and 20
Action supply or extract fan when closing
contact inputs X15-1 & X15-2
0 (factory
setting
Contact input 1
15-1 & X15-2 closed
No action possible because contact input 1 has not been activated yet (parameter 18 is still at 0)
1
Contact input 1
15-1 & X15-2 closed
Action dependent on setting
supply fan (parameter 19) and
extract fan (parameter 20)
0
1
2
3
4
5
6
7
Fan switches off
Hcp"okpkowo"Þqy"tcvg"*72o
3
/h)
Hcp"vq"Þqy"tcvg"oqfg"3
Hcp"vq"Þqy"tcvg"oqfg"4
Hcp"vq"Þqy"tcvg"oqfg"5
Hcp"vq"Þqy"tcvg"ownvkrng"uykvej
Hcp"vq"oczkowo"Þqy"tcvg
No fan activation
2
Contact input 1
15-1 & X15-2 closed
UcvkuÝgu" d{rcuu" eqpfkvk
-
ons for valve open
1
3
Contact input 1
15-1 & X15-2 closed
The bypass valve opens; auto-
matic bypass control in Reno-
vent Excellent is
overruled; action fans depen-
dent on parameters 19 & 20.
4
Contact input 1
15-1 & X15-2 closed
The bedroom valves opens.
Bedroom valve 24 volt is con-
nected to X15-5 (24V GND)
X15-6 (24V +) and X15-9 (0-10
V control); action fans depen-
dent on parameters 19 & 20.
9-pole connector X15
