17
Brew Cycle
IMPORTANT: For optimal brewed flavor, filtered water is preferred.
IMPORTANT:
Before brewing, always check to make sure water level is past the MIN line
and add water if needed. Never exceed the MAX fill line.
NOTE:
The amount of brewed coffee will always be less than the amount of water
placed into the water tank; as much as 10% is absorbed by coffee grounds and filter.
The glass carafe markings indicate the amount of water needed in the water tank to
produce the corresponding cups of brewed coffee.
1. Use the side tab to open the Coffee Maker lid.
2. Remove the flavor infusion carafe lid. Fill carafe with cold water and pour into the water
tank at the back of the unit. The water level indicator can be easily viewed inside the unit.
3. Make sure the flavor infusion tube is in good condition before inserting into the carafe.
Place carafe lid securely over carafe handle and press to make sure it is securely locked
in position.
4. Center empty carafe on the warming plate.
5. Lower and rotate the filter holder until the filter holder handle drops down into the housing.
6. Place the gold tone coffee filter in the removable filter holder. Measure 2 level tablespoons
or 1 scoop of drip or regular ground coffee for each cup of coffee desired. For stronger or
milder coffee, adjust amount of coffee to suit your taste.
7. Close the Coffee Maker lid.
8. Plug the power cord into a 120V AC electrical outlet; the backlighted screen will illuminate.
The default REGULAR brew strength and “12:00 AM” will appear. The HOUR will flash as the
Coffee Maker advances to CLOCK setting mode.
NOTE:
It is not necessary to set the CLOCK to brew coffee.
NOTE:
The screen will darken in 20 seconds if no further buttons are selected.
9. To begin brewing coffee immediately, press the BREW/OFF button. The button will illuminate
white, the backlighted screen will illuminate, default TIME and REG will be displayed.
SO-316015_500121 BRIM 14 cup Programmable CM IM R3.indd 17
2019-03-15 9:06 AM
