Brillion SBA209, Руководство оператора

Страница: 39 / 56

1P761
Page 39
Assem
bly
Assembly
Page 37 308
6K303 HOSE ASM
3/8 x 57”
4K917 HOSE ASM
3/8 x 46”
4K883 HOSE ASM
3/8 x 53”
4K885 HOSE ASM
3/8 x 63”
5K596 HOSE ASM
3/8 x 174”
5K596 HOSE ASM
3/8 x 174”
TEE, 1P292
SCHEMATIC OF DISC CONTROL HYDRAULICS
HOSE CLAMP
4K602, ADAPTER, O-RING
4K912, MALE TRACTOR TIP
TEE, 1P292
ELBOW, 90 O O-RING
4K603
ELBOW, 90
O
O-RING
4K603
HYDRAULIC CYLINDER, 3 x 8
2J674
HYDRAULIC CYLINDER, 3 x 8
2J674
TIGHTENING PROCEDURE FOR SWIVEL
O-RING FITTINGS
1. INSTALL THE FITTING UNTIL THE METAL
WASHER WHICH BACKS UP THE O-RING
CONTACTS THE FACE OF THE BOSS.
2. THEN ORIENT THE FITTING BY TURNING
COUNTERCLOCKWISE UP TO 1 TURN.
3. TIGHTEN THE LOCK NUT USING 50-60
FOOT POUNDS TORQUE.
TIGHTENING PROCEDURE FOR 37
o
JIC SWIVEL FEMALE NUTS
1. CHECK FLARE AND FLARE SEAT FOR DEFECTS.
2. LUBRICATE THE CONNECTION.
3. INSTALL HOSES WITHOUT TWISTS.
4. HAND TIGHTEN UNTIL CONNECTION BOTTOMS.
5. USING 2 WRENCHES TO PREVENT TWISTING, ROTATE
THE SWIVEL NUT 2 WRENCH FLATS (1/3 TURN).
6. FOR REASSEMBLY, FOLLOW THE SAME PROCEDURE
BUT TIGHTEN ONLY 1 WRENCH FLAT (1/6 TURN).
Assemble hose clamps as in diagram; Use
one clamp where routing uses single hose or
2 clamps where two hoses must be routed
together.
Safety Plate
- may be either
configuration
Base plates -
(single or double) are
welded to frame.
Clamps
Top Plate
HHCS,
1/4 x 1 1/2”
Stacking Bolts