MACHINE SETUP INSTRUCTIONS
Watch video instructions on how to setup machine
at BrilliantPad.com/Start
●
Lay out all the parts
: base, covers for supply and waste chambers,
control module, power supply, pad roll, take-up rod and caps (2).
●
Connect the covers to the base
by pressing the clips on the covers onto
the bars on the base.
●
Insert the power cord to the power jack on the control module and
install the control module on the base
.
○
TIP
:
Ensure the green latch is pointing up towards 12 o’clock when
installing the control module. Then rotate the latch clockwise to
the
3 o’clock position to lock in place.
●
Tuck the power cord into the cleats
under the base. Ensure that animals
and children are unable to access the power cord.
●
Press both caps onto the rod
and
then put into the base
.
●
Put the pad roll into the supply cradle
and pull the paper over the
platform. Ensure the absorbent white surface is facing up and the
blue/green film with black marks is facing down.
●
Thread the paper into the clips
.
○
TIP
:
Extend the paper four to six inches beyond the take-up rod
before threading into the clips on top of the take-up rod.
●
Press and hold the Pad Advance button on the Control Module.
Let the
rod turn several rotations to ensure the paper is securely installed. Then
release the Pad Advance button to stop the motor.
●
Close covers and rotate the green latches
to lock the covers.
If you have any questions VISIT
BrilliantPad.com/Help
or CALL
(312) 348-7915
© Brilliant Pet 2 LLC 2020
www.BrilliantPad.com
Page 3