11
2. Setting up the monitor
Open up a sub-window of
another signal source.
B
A
(main)
When the sub source is not
detected:
B
A
(main)
[PBP]: Picture by Picture
Open up a sub-window side-
by-side of another signal
source.
A
(main)
B
When the sub source is not
detected:
A
(main)
Note
•
The black strip shows on the top and
the bottom of the screen for the correct
aspect ratio when in the PBP mode.
The black strip shows on the top and
the bottom of the screen for the correct
aspect ratio when in the PBP mode.
• PIP / PBP Input:
There are four different
video input to choose as the sub display
source:
[DVI], [MHL-HDMI],
and
[DisplayPort].
Please refer below table for compatibility
of main/sub input source.
SUB SOURCE
POSSIBILITY (xl)
Inputs
VGA DP DVI MHL-
HDMI
MAIN
SOURCE
(xl)
VGA
●
●
●
DP
●
●
●
DVI
●
●
●
MHL-
HDMI
●
●
●
• PIP Size:
When PIP is activated, there are
three sub-window sizes to choose:
[Small],
[Middle], [Large].
B
A
(main)
Small
Middle
Large
• PIP Position
: When PIP is activated, there
are two sub-window positions to choose.
Top-Right
Bottom-Right
B
A
(main)
A
(main)
B
Top-Left
Bottom-Left
B
A
(main)
B
A
(main)
Swap:
The main picture source and the sub
picture source swapped on the display.
Swap A and B source in
[PIP]
mode:
B
A
(main)
↔
B
(main)
A
Swap A and B source in [
PBP
] mode:
A
(main)
B
↔
B
(main)
A
