Brightstar SF204OL-01, Руководство пользователя

Страница: 10 / 39

10
Note: Your network service provider will set a standard PIN code (4-8 digits) for your
SIM card. Please change it with your private password as soon as possible. Refer to
Chapter 3.8.5 “Security settings” for details.
2.4.5 Unlocking the phone
Phone lock can prevent your mobile phone from illegal operation. You need to input the
PIN code as the phone password (when PIN code is enabled) every time when you switch
on the mobile phone if this function is enabled, then, you can unlock the phone and make
or answer calls. Users can disable this function (refer to Chapter 3.8.5 “Security settings”),
in which condition the mobile phone can not be protected from illegal operation.

Enter mobile phone password, press the Hung_up key to clear wrong input and press the Dial
key to finish. For example: if the mobile phone password is 1122, you can enter 1122.
If you have forgotten your mobile phone password, please contact your distributor or
local authorized service center to unlock your mobile phone.
2.4.6 Connecting to network

The mobile phone will search for network automatically after the SIM card is decrypted
successfully (display “Searching for network” on the screen). The name of network operator
will appear in the center of the screen once get connected.
Note: If there is prompt of “ENERGENCY” on the screen, it means that you are out of the
normal coverage area (service area) of the network, but you can still make an emergency call
according to the signal intensity.
2.4.7 Make a phone call
When the operator symbolize of the network appear in the screen, you can make or answer a
phone call. The manifestation holds left top Cape of the information show network signal strength.
The converse quality is under the bigger influence of stumbling block, so you can raise
converse quality effectively in the ambulation in the small scope.
2.4.8 Stir to make local telephone call
Using the numerical key to input the telephone number, then press the Dial key to start calling.
If you need change telephone number, please press the Hung_up key back to delete character list.
The screen will show a moving picture when you are dialing the number. After the one you called
hold the phone up there will be some information of the coversing state;if you open the connecting
hint sound, there will also be a hint sound(need network support).
After the converse is over please press the Hung_Up key to hang up a telephone.