30
call. The multi-part call function should get support by the network.
Please contact you network service provider for further information.
○
The following options are available:
“Hold”, “End”, “New call”, “Contacts”, “Message ”, “Sound
record”, “Mute (Local voice will not be transmitted to the other
part)”, “DTMF (You can set it ON or OFF)” and
○
Note!
Some options appear only in some particular situations. Or
they may need the support from the network. For example: “New
call” should be supported by the network.
Auto DTMF
○
In cases when the “P” symbol is placed in between numbers, the
phone will first attempt to connect the call and then automatically
send out the numbers after the “P”.
Auto Answer
○
If the headset has been plugged into the jack on the phone and the
Auto Answer function is set ON, the incoming call will be answered
automatically in 5 seconds. To set the Auto Answer function, follow
the steps: Menu > Settings > User Profiles > Headset > Customize >
Answer Mode.
Auto Redial
○
If the Auto Redial mode is set ON, the call will be redialed
automatically following a failed attempt. To set the Auto Redial
function, follow the steps: Menu > Settings > Call Settings >
Advance settings > Auto Redial.
Sound Management
○
Generally, the key sound and the sound of the ring are heard from
phone speaker during a call. If the preset time of the alarm comes
during a call, the alarm will be delayed from ringing until after the call
has ended.
