10
T-flash card is small and should be pulled out and installed
carefully and prudently in order to avoid any kind of damage.
Please follow the steps mentioned below to install the
memory card in the device:
Switch off your device.
Remove the battery cover.
Slot the T-Flash memory card into the slot.
Attach the battery.
Fix the battery cover until it mount properly into
place.
Charging the battery
The device prompts a warning tone and message stating
insufficient battery when the battery level is low.
Please follow the instructions mentioned below to charge
your device:
Plug the charger connector into the device jack.
Plug the charger into a standard AC wall outlet.
Charging…….
Fully Charged…….
