USERS GUIDE
4
2 Device Installation
2.1 Hardware Installation
Before you want to use your device, please follow the quick steps below to
power up your network:
1. Insert SIM card into SIM slot
；
2. Connect Power adapter
；
3. Hold the Power button to power on;
4. Connect FWT with your terminal device
。
5. Four RJ45 connectors of the device are used to built wired LAN
；
Alternative, user also can choose built-in 3G module connect to the Internet via 3G
network
。
Also
，
WIFI of HT851W can be used to build WLAN
，
RJ11connector can connect
fix-line phone to provides voice service via Circuit Switched (CS) Domain
。
USB connector
can be used to connect USB printer or USB stick to provides network print service and
network store function
。
When 3G Only Internet connection is applied, the device is connected to
the Internet through the built-in 3G Modem, All of the four RJ45 connectors will
be used to build wired LAN network. At the same time, network sharing
function can be achieved through WLAN for any terminal devices that support
WiFi. Voice service is provided via CS domain by connect fix-line phone to
