Technical Notes – Configuring the XD1230 for ZeeVee
1
INTRODUCTION
This BrightSign Tech Note explains how to configure your XD1230 to receive input
from a ZeeVee RF modulator box (model ZVBox170). When following these steps,
make sure you are using BrightAuthor version 3.5.0.22 or later.
Instructions
1. Set up the RF modulator box using the instructions provided by ZeeVee.
2. Attach the coax cable to the RF In connector on the XD1230.
3. Open BrightAuthor and create a new XD1230 project (or open an existing one).
4. Navigate to
Tools > ATSC Setup
.
