BrightSign HD222, HD1022
11
All information provided in this reference manual applies to products under development. The characteristics and specifications of these products are subject to
change without notice. BrightSign assumes no obligation regarding future manufacturing unless otherwise agreed to in writing. © BrightSign LLC, 2015
ENVIRONMENTAL AND POWER USAGE
The HD222 and HD1022 are designed to be used between 0°C and 40°C, at 90% maximum relative humidity, non-
condensing.
The power supply for the HD222 and HD1022 is 15W and 5V @ 3A. The device will use approximately 1A of power when
playing a 720p or 1080i source file.
An additional 2A of power is available for peripherals connected to the player. The user should not connect any
combination of peripherals that will exceed 2A draw. If more than 2A is drawn, the external power supply may shut down
due to over-current conditions. The unit will not be damaged, but it may reboot or not operate properly until the overload is
removed.
If the device is being powered by the power supply, the 2A can be shared in any way among the following connectors:
Connector
Maximum Power Usage
Ethernet
Approx. 180mA (when transferring data)
USB 2.0
500mA (on each connector)
DE9 5V
500mA
DA15 3.3V
500mA
HDMI 5V
500mA
