Operating Instruction
8. IR system
The matrix can pass the IR signal through the IR system to the HDMI source or pass the
IR signal from the HDMI source to the HDMI sink
1) Control the sources at the sinks side
Step1: Connect 8pcs “IR Out” cables to “IR Out” ports 1-8 on the matrix, connect 8pcs “IR
In” cables to the “IR In” ports 1-8 on the receivers.
Step2: Affix the 8xIR emitter of “IR out” cables to the IR window of the 8xHDMI source
Step3: Aim the remote control of HDMI source which you choose to the “IR In” cable
which is connected to the receiver.
For example:
If you choose HDMI source1, then just aim the remote control of HDMI source1 to the “IR
In” cable which connected to the receiver.
2) Control the sinks at the sources side
Step1: Connect 8pcs “IR Out” cables to “IR Out” ports 1-8 on the receivers, connect 8pcs
“IR In” cables to the “IR In” ports 1-8 on the matrix.
Step2: Affix the 8xIR emitter of “IR out” cables to the IR window of the 8xHDMI Sink.
Step3: Aim the remote of HDMI sink to related IR receiver of HDMI Matrix.
For example:
If you need control HDMI Sink1, then just aim the remote of HDMI Sink1 to the “IR In1”
port of HDMI Matrix.
3) Control the HDBaseT Matrix at the sinks side
Aim the remote of the HDBaseT Matrix to the “IR In” cable which connected to the
receiver.
4) Control the HDBaseT Matrix from “IR Ext” port
Aim the remote of the HDBaseT Matrix to the “IR In” cable which connected to the “IR Ext”
Port.
5) IR In----“All” : for any one of the IR in from 1 to 8
6) IR out----“All” : for any one of the IR out from 1 to 8
13
