- 10 / 12 -
This option connects the selected screens into a video wall configuration.
Return the Video Wall configuration to normal outputs.
&
'
Output Type
This option is only available for any screen that is not assigned to a
video wall mode.
This option is only available for any screen that is not assigned to a
video wall mode.
Remove the single screen x from the video wall to allow the displaying
another full frame image within the video wall configuration, as shown in
this example:
Use the sub-menu to select the input to display on the video wall or the
secondary input image shown in the above example.
This option is only available for any screen that is not assigned to a video
wall mode. It allows setting of the output resolution for the selected
screen output.
Two sub options : OFF ( default ), ON ( H+V Mirror)
When select “ON”, you can make 180º rotation with the selected screen.
Output Format
Mirror
When Test Pattern is enabled, the output will display Color Bar pattern
.
Test Pattern
()
The Bezel Setting section allows the entry of values to compensate for the display bezel
thickness. These values may be entered either as pixels (Type A) or as milli metre (Type B).
Type A Bezel Settings
The image size will be adjusted to allow for the number of pixels entered in each of the
entry boxes. Click the “Set” button to view the effect of the new values.
Type B Bezel Settings
The image size will be adjusted to allow for the Inner and Outer display dimensions as
entered in each of the entry boxes. Click the “Set” button to view the effect of the new values.