Brighter Pixel Beam, Руководство пользователя, Страница: 3 / 11

3
1. Safety Instructions

Please keep this User Guide for future consultation. If you sell the unit to
another user, be sure that they also receive this instruction booklet.

Unpack and check carefully there is no transportation damage before using
the unit.

Before operating, ensure that the voltage and frequency of power supply
match the power requirements of the unit.

It’s important to ground the yellow/green conductor to earth in order to
avoid electric shock.

The unit is for indoor use only. Use only in a dry location.

The unit must be installed in a location with adequate ventilation, at least
50cm from adjacent surfaces. Be sure that no ventilation slots are blocked.

Disconnect main power before replacement or servicing.

Make sure there are no flammable materials close to the unit while
operating as it is fire hazard.

Use safety cable when fixes this unit. DO NOT handle the unit by taking its
head only, but always by taking its base.

Maximum ambient temperature is Ta: 40
℃
. DO NOT operate it where the
temperature is higher than this Unit surface temperature may reach up to
85
℃
.

DO NOT touch the housing bare-hands during its operation. Turn off the
power and allow about 15 minutes for the unit to cool down before
replacing or serving.

In case of serious operating problem, stop using the unit immediately. Never
try to repair the unit by yourself. Repairs carried out by unskilled people can
lead to damage or malfunction. Please contact the nearest authorized
technical assistance centre. Always use the same type spare parts.

DO NOT touch any wire during operation as high voltage might be causing
electric shock.
Warning:

To prevent or reduce the risk of electrical shock or fire, do not expose the
unit to rain or moisture.

DO NOT open the unit within five minutes after switching off.