CONTENTS INCLUDE:
•
Bluetooth Stereo Headphones with built-in microphone
BLUETOOTH COMPATIBILITY:
•
Helix H31 supports hand-free profile (HFP), headset profile (HSP), advance audio distribution profile (A2DP), and
audio/video remote control profile (AVRCP). Helix H31 is compatible with most MP3 players, personal computers or
cellular phones that support the same profile.
•
To stream music from any audio devices to Helix H31, the audio device must support
A2DP profile. Please refer to the owner's manual of the audio device or consult to the
manufacturer of the audio device for further assistance.
USING THE HEADPHONES:
1. Power on: press and hold the power button on the downside of the right earcup for about 2
seconds, and release the button when the blue LED logo light is on.
2. Power off: press and hold the power button on the downside of the right earcup until the
blue LED logo light is off.
Important:
•
Placing the headphones over the correct ears is important since they are designed to fit the
shape of the head.
•
The earcups twist in only one direction—forcing them to twist in the wrong direction will
damage the headphones.
INSTALLING THE BATTERIES:
1. To install batteries, please twist-to-open the battery
compartment cover on the left earcup using a coin as
illustrated in the picture on the right.
2. Place the battery according to the polarity indication shown
inside the battery compartment.
Note
:
•
Please remove the battery if storing the headphones for an
extended period of time.
PAIRING WITH MOBILE PHONE:
1. Please ensure the headphone is off before entering the pairing mode.
The blue LED logo on both earcups shall be off.
2. To activate pairing, press and hold the power button at the bottom of
the right earcup for 5 seconds until the blue LED logo light is flashing
quickly.
3. Enable Bluetooth service on the cellphone and perform a device
discovery from the cellphone (search or scan). Please refer to the
cellphone instruction manual or consult to the cellphone manufacturer
for additional information.
4. Select the device “BT-H31” and then enter the pairing key “0000” if
prompt for input. The cellphone will finish the pairing automatically.
5. When the pairing is complete, the blue LED logo on both earcups will
stop flashing quickly.
Note:
Above procedure is necessary only when using Helix H31 with the
cellphone for the first time. To use Helix H31 with another cellphone, please repeat the procedure above. To use Helix H31 with
previously paired cellphone, please go to the Bluetooth menu on the cellphone and select the appropriate function to reconnect to
Helix H31.
PAIRING WITH PC:
1. Please ensure the headphone is off before entering the pairing mode. The blue LED logo on both earcups shall be off.
3
