| 14 |
REV202207071617
Height
30” (including 1.5” terminal height)
Depth
8.5”
Weight
160 Pounds
Figure 4.0 –SimpliPHI Mounting Bracket Assembly
4.5 – SimpliPHI Battery Connection Terminals
4.5.1 – Batteries with Threaded Studs
The SimpliPHI Battery is equipped with two 3/8’’ (10 mm) threaded stud terminals with a lock washer
and nut. The red colored high temperature molded insert connection is for the positive lead. The black
colored high temperature insert connection is for the negative lead.
Black terminal covers are provided and will be installed over the terminals; remove the terminal covers
before installation and re-install after attaching battery cables. In order to maintain IP65 rating,
outdoor installations will require the Battery Conduit Box [ordered separately] to be installed over the
top portion of the battery. Failing to install Battery Conduit Box in outdoor installation will Violate the
terms of the Warranty.
CAUTION:
Do not attempt to loosen the large brass nut at the base of the terminals; doing so
will damage the SimpliPHI battery and Violate the terms of the Warranty.
4.5.2 – Torque Batteries with Threaded Studs
SimpliPHI Batteries with threaded stud terminals have a torque specification of 160 in-lbs. (13.3 ft-
lbs.). Do not use power tools or impact drivers to tighten the stud terminals. This can result in damage
or breakage to the stud terminal and will Violate the terms of the Warranty.
