5
Assembly
Read entire operator’s manual before you
attempt to assemble or operate your new
electric pressure washer.
Your electric pressure washer requires some assembly
but is quickly ready for use. If you have any problems with
the assembly of your electric pressure washer, please call
the electric pressure washer helpline at
(800) 743-4115
. If
calling for assistance, please have the model, revision, and
serial number from the identification label available.
Unpack Electric Pressure Washer
1. Remove everything from carton.
2. Raise handle (
A
) to upright position by pulling up latch
(
B
) on each side of handle. Push latches down to
secure handle in place.
NOTICE
The unit is equipped with a foldable handle. The
handle can be folded down for storage. See
Final Storage
Procedure
s.
3. Ensure you have all included items prior to assembly.
Lubricate O-rings
Lubricate all connections shown to extend the life of the
o-rings.
1. Inspect and clean connecting surfaces prior to
lubrication and assembly. Replace o-rings that are
damaged or missing.
NOTICE
ALWAYS apply a small amount of lubricant on
o-rings prior to assembling the garden hose to the pump
(
C
), high pressure hose (
D
), spray gun (
E
) and spray
wand (
F
).
NOTICE
Never repair leaking connections with sealant of
any kind. Replace o-ring.
2. Use a small brush or cotton swab to apply a light
coating of grease directly to o-rings.
Connect Hose and Water Supply to Pump
NOTICE
DO NOT run the pump without the water supply
connected and turned on.
• Damage to equipment resulting from failure to follow this
instruction will void warranty.
1. Uncoil high pressure hose (
G
) and attach black end of
hose to base of spray gun (
H
). Tighten by hand.
F
E
C
D
B
A
B
WARNING
The high pressure stream of water that
this equipment produces could cut through skin
and its underlying tissues, resulting in serious
injury and possible amputation.
• NEVER connect high pressure hose to spray wand.
• Keep high pressure hose connected to pump and spray
gun while system is pressurized.
• Always be certain spray gun, nozzles and accessories
are correctly attached.
B
A
