Briggs & Stratton NAX 950V, Руководство пользователя

Страница: 15 / 28

15
When observing the instructions in the operating manual, the residual hazards of using the machine may be eliminated.
There is a risk in case of failure to comply with the above recommendations.
USAGE
Correct, reliable and safe operation using a garden vacuum cleaner depends mainly on proper operation.
Non-compliance with the instructions in this manual excludes the manufacturer and the service from any liability resulting
from this.
The garden vacuum cleaner is widely used in works related to cleaning up green areas around the house and home garden.
The vacuum cleaner is suitable for cleaning and removing leaves, cut grass, fallen conifer needles from terraces, roads and
paths. The NAX garden vacuum cleaner has a grinding function. The device should not be used for purposes other than
those for which it is intended, e.g. for sucking stones, branches, polystyrene. The device cannot be used on surfaces where
there is health threatening dust / dust or as a tool for sucking water.
BEFORE THE FIRST START UP
The vacuum cleaner is supplied by the manufacturer in a cardboard packaging in a partially disassembled state. After
reading the operating manual and assembly drawings, it should not be too difficult to assemble the vacuum cleaner All
necessary components for assembly are included in the packaging. This operation manual applies to various models of
vacuum cleaners. This vacuum cleaner may differ from your purchase. Read the passages that refer to the device model you
have.
OPERATION
CONSTRUCTION OF THE GARDEN VACUUM CLEANER / BLOWER
Illustrative drawings can be found on page 4, Fig. 1
1.
Throttle trigger
2. Power On/Off switch;
3. Fuel pump
4. Choke control
5. Fuel-filler cap
6. Starter rope handle
7. Spark plug pipe
8. Muffler
9. Air filter cover
10. Upper handle
11. Lower handle
12. A nozzle focusing the air stream
13. Blower bottom tube
14. Blower upper tube
15. Lower suction pipe
16. Upper suction pipe
17. Retaining Screws
18. Bag connector with pipe
19. Leaf collection bag
20. Motor housing
21. Outlet port hole
22. Retaining Screws
23. Bent outlet pipe