manualshive.com logo in svg

Briggs & Stratton NAX 300C, Руководство пользователя, Страница: 18 / 32

Поделиться
Скачать
Briggs & Stratton NAX 300C Скачать руководство пользователя страница 18

 

18 

 

 

SAFETY AND PRODUCER'S LIABILITY 

Any  use  of  the  chain  saw,  other  than  described  in  this  manual  is  considered  improper  and  the  manufacturer  is  not  liable  for  any 

damage or damages resulting from such a procedure. 

Proper use also includes respecting the operating, maintenance, storage and repair conditions established by the manufacturer. 

 

To prevent accidents, all safety precautions and hazard avoidance must be followed. Any changes in the construction of the device 
made by the user may affect the safety of use of the machine and release the manufacturer from liability for damage or injuries. 

 

RESIDUAL RISK 

Despite the fact that the machine manufacturer bears responsibility for its construction eliminating danger, certain elements of risk 
during operation are unavoidable. The residual risk arises from the erroneous behavior of the machine's operator. The greatest danger 
occurs when performing the following prohibited activities: 

 

 

use of the device by children, 

 

use of the machine for other purposes than described in the Operation Manual, 

 

when other people, especially children or animals are nearby, 

 

use of the device by people not acquainted with the operation's manual, 

 

using the device without proper, protecting operating clothing and footwear protecting foot, 

 

using the device with damaged guards or the casing and without properly installed safety devices, e.g. shield guards etc. 

 

When observing the instructions in the operating manual, the residual hazards of using the machine may be eliminated. There is a risk 

in case of failure to comply with the above recommendations. 

 

USAGE 

The  device  is  intended  only  for  work  in  the  home  garden  in  accordance  with  the  description  and  safety  rules  contained  in  these 
operation manual. It can be used for cutting trees, cutting branches, preparing firewood and for other applications that require pruning. 

 

Other applications may be dangerous to users and may cause damage to the equipment. 

 

The device should not be used to: 

 

 

cutting materials other than wood and wood-based materials, 

 

as a lever for lifting, moving or dividing objects. 

 

 

ADDITIONAL INFORMATION FOR THE USER 

Performing  maintenance  and  adjustment  work  before  or  after  the  season  can  be  a  problem  even  for  advanced  users.  The  NAX 
company would like to offer you a service consisting in preparing the machine for storage and / or work. The scope of this service may 
include: candle replacement, cleaning, maintenance, oil change, filter replacement and lubrication of moving parts, knife sharpening 
and balancing, as well as other work related to the adjustment and maintenance of equipment. This will ensure long-term and reliable 
operation and safety of the device. 

 

PREPARING FOR WORK 

The  saw  is  supplied  by  the  manufacturer  in  a  cardboard  packaging  in  a  partially  disassembled  state.  After  reading  the  operating 

instructions and assembly drawings, assembling the chain saw should not be too difficult. All necessary components for assembly are 
included in the packaging. 

 
 

WARNING!

 The chain has very sharp edges. Use thick protective gloves for safety. 

 

Stay away from the saw chain as it will start to rotate when the engine starts. 

 

The handles should be dry, clean and free from oil or the fuel mixture. 

Содержание NAX 300C

































Отзывы:

Нет отзывов