Briggs & Stratton Industrial Plus Snow 90000, Инструкция по эксплуатации и техническому обслуживанию

Страница: 7 / 20

Document: - page 7 (Black)
Screen angle and frequency: 45.0000, 150.0000
7
ENGINE INFORMATION
275697
Intek
E
Snow MODELS 120000, 200000, 210000
Model Series 120000, 200000, 210000 are single cylinder, over-
head valve (OHV), air-cooled engines. If your engine is of this se-
ries it is a low emissions engine.
In the state of California, OHV Model Series 120000 engines are
certified by the California Air Resources Board to meet emissions
standards for 125 hours; the Model Series 200000 for 250 hours.
Such certification does not grant the purchaser, owner or operator
of this engine any additional warranties with respect to the perfor-
mance or operational life of this engine. This engine is warranted
solely according to the product and emissions warranties stated
elsewhere in this manual. MODEL SERIES 120000
Bore 2.677 in. (68 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stroke 2.205 in. (56 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displacement 12.48 cu. in. (206 cc) . . . . . . . . . . . . . . . . . .
MODEL SERIES 200000
Bore 3.120 in. (79.23 mm) . . . . . . . . . . . . . . . . . . . . . . . . . .
Stroke 2.438 in. (61.67 mm) . . . . . . . . . . . . . . . . . . . . . . . .
Displacement 18.64 cu. in. (305 cc) . . . . . . . . . . . . . . . . . .
MODEL SERIES 210000
Bore 3.300 in. (83.82 mm) . . . . . . . . . . . . . . . . . . . . . . . . . .
Stroke 2.438 in. (61.67 mm) . . . . . . . . . . . . . . . . . . . . . . . .
Displacement 20.85 cu. in. (342 cc) . . . . . . . . . . . . . . . . . .
TUNE-UP SPECIFICATIONS
Armature air gap 0.010 – 0.014 in. (0.25 – 0.36 mm) . . .
Spark plug gap 0.030 in. (0.76 mm) . . . . . . . . . . . . . . . . . .
See Repair Manual P/N 272147.
Measure valve clearance with valve springs installed and
piston 1/4 in. (6 mm) past top dead center. Check when
engine is cold.
Intake
0.004 – 0.006 in. (0.10 – 0.15 mm) . . . . . . . . . . . . .
Exhaust 0.009 – 0.011 in. (0.23 – 0.28 mm) . . . . . . . . . . .
Industrial Plus
E
Snow MODEL 90000
This is a single cylinder, L-head, air-cooled engine. It is a low
emissions engine.
Bore 2.562 in. (65.09 mm) . . . . . . . . . . . . . . . . . . . . . . . . . .
Stroke 1.750 in. (44.45 mm) . . . . . . . . . . . . . . . . . . . . . . . .
Displacement 9.02 cu. in. (148.0 cc) . . . . . . . . . . . . . . . . . .
TUNE-UP SPECIFICATIONS
Armature air gap 0.006 – 0.010 in. (0.15 – 0.25 mm) . . .
Spark plug gap 0.030 in. (0.76 mm) . . . . . . . . . . . . . . . . . .
See Repair Manual P/N 270962.
Measure valve clearance with valve springs installed and
piston 1/4 in. (6 mm) past top dead center. Check when
engine is cold.
Intake
0.005 – 0.007 in. (0.13 – 0.18 mm) . . . . . . . . . . . . .
Exhaust 0.007 – 0.009 in. (0.18 – 0.23 mm) . . . . . . . . . . .
Note:
For practical operation, horsepower loading should not ex-
ceed 85% of rated horsepower. Engine power will decrease
3-1/2% for each 1,000 feet (300 meters) above sea level and 1%
for each 10
°
F (5.6
°
C) above 77
°
F (25
°
C). Engine will operate
satisfactorily at an angle up to 15
°
.