3
Position
Button
Description
A
Start Button
Works in MANUAL MODE only. Press this button to initiate the start sequence
of the engine.
B
Stop Button
Works in MANUAL MODE only. Press this button to initiate the stop sequence
of the engine. Repeated pressing or holding the button for more than 2
seconds will cancel current phase of the stop sequence (like ramping the
power down or cooling) and next phase will continue.
C
Fault Reset
Use this button to acknowledge alarms and deactivate the horn output. Inactive
alarms will disappear immediately and status of active alarms will be changed
to “confirmed” so they will disappear.
D
Horn Reset
Use this button to deactivate the horn output without acknowledging the alarms.
E
Supplying Load
This LED is not used on these models.
F
Ready / Auto
Indicates the generator is in AUTO mode and ready for operation.
G
Warning
Indicates a generator warning is present.
H
Running
Indicates generator is running.
J
Not in Auto
Indicates the generator is not in AUTO mode.
K
Alarm
Indicates a generator alarm is present.
L
Enter Button
Use this button to finish editing a setpoint or moving “right” in the history page.
M
Down Button
Use this button to move down or decrease a value.
N
Up Button
Use this button to move up or increase a value.
P
Page Button
Use this button to switch over display pages.
R
LCD Display
Black/White display screen.
S
Mode Left
Use this button to change the mode. The button works only if the main screen
with the indicator of currently selected mode is displayed.
T
Mode Right
Use this button to change the mode. The button works only if the main screen
with the indicator of currently selected mode is displayed.
A
M
N
B
C
D
L
P
T
S
K
J
H
G
F
E
R
System Controller
Not for
Reproduction
