12
MAINTENANCE
CLEANING DEBRIS
Daily or before every use, clean accumulated debris from
engine. Keep linkage, spring and controls clean. Keep area
around and behind muffler free of any combustible debris.
CAUTION:
Do not use water to clean engine
parts. Water could contaminate fuel system.
Use a brush or dry cloth.
Engine parts should be kept clean to reduce the risk of
overheating and ignition of accumulated debris.
WARNING
Finger Guard
Linkage, Springs, Controls
Muffler, Spark Arrester
CLEAN
CLEAN
CLEAN
CHANGING OIL IN GEAR REDUCTION
(if equipped)
Change oil in gear reduction after every 100 hours of
operation.
[1] To drain oil, loosen 4 gear case cover screws and drain
oil into appropriate receptacle.
[2] After draining, torque 4 screws to 85 in-lbs.
[3] To refill, pour SAE 30 oil into oil fill hole until it runs out
level check hole.
[4] Replace both oil plugs.
Note:
Oil filler plug has a vent hole and must be installed on
top of gear case cover.
OIL FILLER PLUG
OIL LEVEL
PLUG
VENT HOLE
4 GEAR CASE
COVER SCREWS