background image

Thank You 

for purchasing this quality-built Brute product. We’re pleased that you placed your confidence

in the Brute brand. When operated and maintained according to the instructions in this manual, your
Brute product will provide many years of dependable service.

This manual contains 

safety information to make you aware of the hazards and risks associated with the

machine and how to avoid them.  This machine is designed and intended only for finish cutting of
established lawns and is not intended for any other purpose. It is important that you read and understand
these instructions thoroughly before attempting to start or operate this equipment. Save these
instructions for future reference.

PRODUCT REGISTRATION

IMPORTANT: KEEP THIS INFORMATION FOR YOUR PERSONAL RECORDS
(Complete the following information on your Brute purchase)

Date of Purchase__________________________________________________________________

Retailer_________________________________________________________________________

Retailer's Phone Number___________________________________________________________

Equipment

Model Number______________________________________________________________

Serial Number ______________________________________________________________

Engine

Model_________________________Type__________________Trim___________________

It is very important that you register your purchase to ensure warranty coverage. Please mail your
product registration card to:

Brute Power
Briggs & Stratton Power Products Group, LLC
900 N. Parkway
Jefferson, WI 53549

Or you may register online at www.brutepower.com.

You can contact us at our website, or if you would like to speak with a Customer Service
Representative, call us at the Brute Customer Relations Center. For faster service please have your
Serial Number and Model Number available.

Briggs & Stratton Yard Power Products Group

Copyright © 2007, Briggs & Stratton Corporation

Milwaukee, WI, USA.  All Rights Reserved.

Brute is a trademark of 
Briggs & Stratton Power Products Group, LLC
Jefferson, WI, USA.

Содержание 7800268

























Отзывы: