Briggs & Stratton 5900570 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 52

background image

2

Operator Safety

Operating Safety

Congratulations on purchasing a superior-quality piece of lawn and
garden equipment. Our products are designed and manufactured to meet
or exceed all industry standards for safety.

Do not operate this machine unless you have been trained. Reading and
understanding this operator’s manual is a way to train yourself.

Power equipment is only as safe as the operator. If it is misused, or
not properly maintained, it can be dangerous! Remember, you are
responsible for your safety and that of those around you.

Use common sense, and think through what you are doing. If you are
not sure that the task you are about to perform can be safely done with
the equipment you have chosen, ask a professional: contact your local
authorized dealer.

Read the Manual

The operator’s manual contains important safety information
you need to be aware of BEFORE you operate your unit as well
as DURING operation.

Safe operating techniques, an explanation of the product’s
features and controls, and maintenance information is
included to help you get the most out of your equipment
investment.

Be sure to completely read the Safety Rules and Information
found on the following pages. Also completely read the
Operation section.

Children

Tragic accidents can occur with children. Do not
allow them anywhere near the area of operation.
Children are often attracted to the unit and mowing
activity. Never assume that children will remain
where you last saw them. If there is a risk that
children may enter the area where you are mowing,
have another responsible adult watch them.

Operator Safety

Safety Rules and Information

Not

for

Reproduction

«
...
2
3
4
5
6
...
»

Содержание 5900570





















































Отзывы:

Нет отзывов

Похожие инструкции для 5900570

Бренд: Walker Страницы: 76

Бренд: Vari Страницы: 56

Бренд: Viking Страницы: 56

Бренд: Troy-Bilt Страницы: 24

Бренд: Skil Страницы: 104

Бренд: Textron Страницы: 26

Бренд: Gravely Страницы: 52

Бренд: HUSTLER Страницы: 65

Бренд: Parkside Страницы: 160

Бренд: Yard-Man Страницы: 24

YARD-MAN Series 556

Бренд: Yard-Man Страницы: 20

Бренд: Toro Страницы: 116

Бренд: Flymo Страницы: 10

Eco Wheeler GM 413.2 R

Бренд: Garten Meister Страницы: 96

Бренд: MDL POWERUP Страницы: 26

Бренд: MTD Страницы: 32

Бренд: Cub Cadet Страницы: 32

PowerSafe 30WS/S Series

Бренд: Ferrari Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды