Briggs & Stratton 1695734, Руководство по установке, Страница: 2 / 8

Install the Discharge Chute
NOTE: Some models have the discharge chute already
installed.
Place discharge chute ( 1. M , Figure 5) over tabs on chute
ring ( N ) as shown.
Secure discharge chute with three carriage bolts ( 2. O ) and
nuts ( P ).
Figure 5
Route De fl ector Cable & Clip (if included)
Figure 6
Figure 7
Figure 4
L
NOTE: If the chute rotation is slow or binding, loosen the
chute rotation screws ( L , Figure 4) 1/4 turn.
M
N
O
P
P
P
3. Tighten hardware to 66 in-lbs (7.6 Nm).
4. Connect the wire harness (electric chute models only).
NOTE: Check all bolts and nuts in fl ange for tightness. Do not
overtighten.
Not
for
Reproduction