background image

PERF EC TION

MODELS: 35-DVRS31NB-2 &  

35-DVRS31NBN-2

GAS FIRED DIRECT VENT FIREPLACE

S/ N 312121 AND UP

ARC HGARD F IREPLAC E PRODU C TS

7116 Beatty  Drive

Missio n,  BC V2V 6B4 Canad a

200- 0035- 10 

Ju ly  27,  2022

English and  French Installatio n Manuals available thro ugh yo

ur 

lo cal d ealer o r visit o ur website at:  

w w w . a r c h g a r d . c o m

Les m anuels d ' installatio n en anglais et en frança is so n 
d ispo nibles chez  vo tre d é taillant lo cal o u en visitant no tre site 
web:  

w w w . a r c h g a r d . c o m

INSTALLER

:  

LEAVE THIS MANUAL WITH THE APPLIANCE.

C ONSU MER

:   

RETAIN THIS MANUAL FOR FUTURE REFERENCE.

Th i s  a p p l i a n c e  m a y  b e  i n s t a l l e d  i n  a n  a f t e r m a r k e t  
p e r m a n e n t l y  l o c a t e d ,  m a n u f a c t u r e d  h o m e  ( U SA o n l y )  o r  
m o b i l e  h o m e  w h e r e  n o t  p r o h i b i t e d  b y  l o c a l  c o d e s .

Th i s  a p p l i a n c e  i s  o n l y  f o r  u s e  w i t h  t h e  t y p e  o f  g a s  i n d i c a t e d  
o n  t h e  r a t i n g  p l a t e .  Th i s  a p p l i a n c e  i s  n o t  c o n v e r t i b l e  f o r  u s e  

with other gases, unless a certified kit is used. 

INSTALLATION,  OPERATION,  AND 

MAINTENANC E MANU AL

- Do not store or use gasoline or other flammable vapors or 

l i q u i d s  i n  t h e  v i c i n i t y  o f  t h i s  o r  a n y  o t h e r  a p p l i a n c e .  

- W

HAT TO DO IF  Y OU  SMELL GAS:

Do  n o t  t r y  t o  l i g h t  a n y  a p p l i a n c e

Do  n o t  t o u c h  a n y  e l e c t r i c a l  s w i t c h ;  d o  n o t  u s e  a n y  
p h o n e  i n  y o u r  b u i l d i n g

Le a v e  t h e  b u i l d i n g  i m m e d i a t e l y

Im m e d i a t e l y  c a l l  y o u r  g a s  s u p p l i e r  f r o m  a  n e i g h b o r ' s  
p h o n e .  F o l l o w  t h e  g a s  s u p p l i e r s  i n s t r u c t i o n s

If you can not reach your gas supplier, call the fire 

d e p a r t m e n t

- Installation and service must be performed by a qualified 

i n s t a l l e r ,  s e r v i c e  a g e n c y  o r  t h e  g a s  s u p p l i e r .

W ARNING:

F IRE OR EX PLOSION HAZ ARD
F a i l u r e  t o  f o l l o w  s a f e t y  w a r n i n g s  e x a c t l y  c o u l d  r e s u l t  i n  
s e r i o u s  i n j u r y ,  d e a t h ,  o r  p r o p e r t y  d a m a g e .

Gas Fireplace Energy Efficiency Rating 

7 5. 4 0 %

Ba s e d  o n  C SA P. 4 . 1-15

Содержание PERFECTION 35-DVRS31NB-2









































































Отзывы: