Brigade MDR-504 Series, Инструкция по установке и эксплуатации

Страница: 96 / 102

96
Electrical Interface
Operating Voltage (min. / typ. / max.) 8.5V /12V / 32V (without any cameras and any accessories)
Quiescent Current At 12V: 0.9mA, At 24V: 1.25mA [MDR-504 Series]
At 12V: 1.78mA, At 24V: 2.28mA [MDR-508 Series]
Current Consumption (min. / typ. / max.
per mode) MDR-504 Variants:
300mA (stable @ 24V) / 600mA (stable @ 12V)
(without cameras, camera heaters off and MCU heater off)
500mA (stable @ 24V) / 1A (stable @ 12V)
(with cameras, camera heaters off and MCU heater off)
2.5A (stable @ 24V) / 5A (stable @ 12V)
(with cameras, camera heaters on and MCU heater on)
MDR-508 Variants:
1A (stable @ 24V) / 2A (stable @ 12V)
(with cameras, camera heaters off and MCU heater off)
3.3A (stable @ 24V) / 6.6A (stable @ 12V)
(with cameras, camera heaters on and MCU heater on)
Power Consumption MDR-504 Variants:
7.2W (without cameras, camera heaters off and MCU heater off)
12W (with cameras, camera heaters off and MCU heater off)
60W (with cameras, camera heaters on and MCU heater on)
MDR-508 Variants:
24W (with cameras, camera heaters off and MCU heater off)
79.2W (with cameras, camera heaters on and MCU heater on)
Trigger Inputs 8x (approx. 9.0V threshold input voltage)
12V Out Wire 1x 12V @ 3A Maximum Load
36V Short-to-rail protection, Short-to-GND protection
Trigger Outputs 2x 12V at 250mA Maximum Load
36V Short-to-rail protection, Short-to-GND protection
Video Input/output 1.0 Vp-
p / 75Ω
Maximum Camera Supply Current 500mA
Power-up Time to Recording 50 Seconds
Test and Environmental Specification
Operating Temperature Range -40°C to +70°C
(Use built-in heater if temperature below 0°C)
Storage Temperature Range -40°C to +85°C
Vibration Rating (Peak Acceleration in g
and Test Standard) 1G
Shock Rating (Peak Acceleration in g and
Test Standard) 51G
Ingress Protection IP30
Operating Relative Humidity 10% to 90%
Approvals
CE
UNECE Regulation No. 10 Revision 5
(“E-marking”)
FCC
IC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any change or modifications not expressly approved by the responsible party responsible for compliance could void the user’s authority to
operate the equipment.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. For products available in the US and Canadian markets, only channels 1~11 are available. You cannot select other channels. This
device and its antennas must not be co-located or operated in conjunction with any other antenna or transmitter except in accordance with FCC
multi-transmitter product procedures. This device operates in the ~2.4GHz frequency range. It is restricted to indoor environments only.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the
device. For products available in the US and Canadian markets, only channels 1~11 are available. You cannot select other channels. This
device and its antennas must not be co-located or operated in conjunction with any other antenna or transmitter except in accordance with IC
multi-transmitter product procedures. This device may automatically discontinue transmission if there is no information to transmit, or an
operational failure. Note that this is not intended to prohibit the transmission of control or signalling information or the use of repetitive codes
where required by the technology. To reduce potential for harmful interference to co-channel mobile satellite systems, this device operates in
the 5150-5250 MHz band, and is for indoor use only.
Brigade Electronics
MDR-50XXXXXXX(XXX)