Installation & Control Key
.
.
.
.
.
.
.
MAIN POWER ON OFF
Push button #2 shortly to power ON.
Push button #2 long to power OFF.
4 CAMERAS
Select the button(#‑1) to display the corresponding camera
in full screen mode.
QUAD
Push the QUAD button (#‑2) to see all cameras in one screen.
In this mode, the audio will be available only with CA1.
A/V
Push A/V button (#‑3) to see A/V device that is connected to
A/V‑In terminal(4)
4 CAMERAS SEQUENTIAL SCANNING
Push the SCAN button(#‑4) to adjust the sequential dwell time.
You may adjust the time from 1 to 9 seconds by pressing this button.
One push changes 1 second. You can see the change of time on the
monitor screen.
AUTOMATIC TRIGGERING
There are total 5‑triggering wires(10). Connect the wires according to
your purpose to see the cameras. All trigger inputs feature a 2 second
time delay to avoid flickering caused by on/off cycled inputs such as
turn signals. The QUAD triggering can be connected to some power
source which can supply power when you want to see QUAD screen
automatically.
TRIGGER OUT
Connect a phonejackk cable to trigger any event recorder automatically.
(DC 5V out when the camera is triggered by automatic trigger wire.)
When using your product, always follow these safety precautions.
Use correct input power.
Do not expose the product to water or any other liquid.
Do not disassemble the product. Take it to a qualified service person
when service or repair work is required. Incorrect reassembly of the
product can cause electric shock.
If you notice smoke or a strange smell coming from the product,
immediately disconnect the product from the power source.
Use of controls, adjustments, or procedures other than specified herein
may result in exposure to shock or electrical and mechanical hazards.
.
.
.
.
.
Important Safety Instructions
Control key
Installation
Features
.
.
.
.
.
.
.
.
.
4‑Camera Inputs
1 A/V Input for A/V devices such as like DVD Player, T/V tuner and VCR
1 A/V Output to Recorder(VCR, DVR) or extra Monitor
1 A/V Output with 12V DC Power to the Monitor
5‑Automatic Triggering Wires with Input voltage from 12V
~
42V DC
Automatic QUAD mode when triggered by more than two triggers.
Automatic 4 Cameras Sequential Switching with adjustable dwell time
from 1 Sec to 9 Sec.
Full Automatic Controls using wired Remote Controller
Designed for multiple applications such as side view cameras and rear
view cameras for any kind of vehicle.
Durable Metal Housing.
CQS-100C
Operations Manual
AUDIO
NOR/MIR
DC 12V
VIDEO
CAMERA INPUT
AUDIO output
N.C
DC 12V output
VIDEO output
MONITER OUTPUT
RED
DC 12V output
YELLOW
AODIO output
WHITE
VIDEO output
MONITER CONNECT CABLE
(#‑1)
(#‑2)
(#‑3)
(#‑4)
(#‑5)
Remote Controller
1
2
3
4 5
6 7
8
2M Power & Triggering Cable Kits
1. GREEN : CA1 Trigger (DC 12 42V)
2. WHITE : CA2 Trigger (DC 12 42V)
3. BROWN : CA3 Trigger (DC 12 42V)
4. BLUE : CA4 Trigger (DC 12 42V)
5. YELLOW : Trigger5 (QUAD)
6. BLACK : GND
7. BLACK : GND
8. RED : B+(12 42V DC IN)
Switcher Box
1
2 3
4 5
6
7
Power & Triggering Cable
Remote Controller
Monitor Connection Cable
Camera Connection Calbes
Mounting Screw
