Brigade Backsense BS-9000-WD, Инструкция по установке и эксплуатации

Страница: 38 / 42

38
Electrical Specification
Input voltage 9Vdc to 32Vdc
Input current 920mA at 9Vdc and 250mA at 32Vdc
Fuse 3A, automotive (regular size) blade fuse type, located on red
power supply cable
Polarity Negative ground
Vehicle connection System supply positive, negative, activation input and trigger
output
5 single cables exiting at the back of the connector on the
end of the display cable
Activation Input: Rating 0Vdc to 32Vdc
System active above 9Vdc, inactive below 7Vdc
Trigger Output Active State: switched to ground up to 0.5A
Inactive State: High impedance (> 1 MOhm)
External Sounder Output Active State: switched to ground up to 0.5A
Inactive State: High impedance (> 1 MOhm)
Sounder duty cycle will match internal buzzer
Voltage protection ISO 7637 + ISO 16750 (over and reverse voltage protection)
Approvals
CE
UNECE Regulation No. 10 Revision 5
(“E-marking”)
ISO 16750
ISO 13766
EN 13309
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Any change or modificatio
ns not expressly approved by the responsible party responsible for compliance could void the user’s
authority to operate the equipment.
Brigade Electronics
BS-WD-01