2021 Owner’s Manual Navigator24
BRIG ltd
29
Close the filler neck tightly. Close the deck hatch.
2.On the panel with switches (see steering console Fig.5) find switch of the d- “SHOWER PUMP”. The backlight of
the switch indicates the activation of the selected mode “ON”.
NEVER ACTIVATE THE PUMP WHEN THERE IS NO
WATER IN THE WATER TANK. DAMAGE MAY OCCUR.
3.
Wait a few seconds for the pump to build up water pressure in the system. You can hear the characteristic pump
sound. The pump works in automatic mode. It will turn on periodically to maintain pressure in the system.
4.Open container with a shower. There is a marking of the container with a shower: “FRESH WATER”. Take the
shower handset and press the button on it. Water will flow as long as you hold down the button.
5.
Put the shower handset back in the container after use.
6. On the panel with switches (see steering console Fig.5), turn off the switch “SHOWER PUMP”.
When the switch is
not lit, the water pump is switched off.
.
SERVICING.
To inspect the system open hatch under the left stern seat (Fig.2, Pos.10) and remove the left aft locker (Fig.2, Pos.28).
Open the deck hatch (Fig.9, Pos.9).
Inspect hoses and fresh water pump (3). Inspect the water tank and its fixing bracket. There should be no damage,
cracks, scuffs.
Wash (or replace) the filter (4) if necessary.
There should be no water leakage from the fresh water system. If the system is not tight, the pump will run continuously
trying to build up pressure.
Flush the system thoroughly periodically
with fresh water to avoid mold and odor.
Water on freezing can damage the fresh water system.
Water from the tank and hoses must be removed if there is a risk of freezing.
The water in the fresh water system is not intended for drinking.
