— 28 —
"BRIG" inflatable boats
z
HOW TO INSTALL STEERING CONSOLE.
— please, put the steering console (1) onto the console base (2),
built-in in the deck of the boat, (Fig. A1);
— fix the steering console with the help of bolts M8 with washers from
the steering console complete set;
— please, connect electric cable harness of outboard motor
with corresponding console wires in accordance with
WIRING DIAGRAM,
(Fig. D10);
— please, install the remote control cable. Follow the instructions
manual provided with the remote control box;
— please, install throttle cable (motor side). Follow the instructions
manual provided with the outboard motor;
— please, double-check that the remote control cables
(i.e., the throttle cable and shift cable) have been connected
correctly. For checking follow the instructions manual provided
with the outboard motor and remote control box;
— please, install the hydraulic steering system hoses. Follow the
instructions manual, provided with the hydraulic steering
system set.
PREPARATION FOR EXPLOITATION.
In order to set the boat in the operation condition perform as follows:
— unfold the inflatable tube;
— mount the outboard motor on the transom in accodance with it's
own installation instruction (manual of your outboard engine).
A1
To avoid the water penetration into the
console inner layers please tight all the holes/
free space with any water-resisting filler.
1
2
self-lapping nut M8
washers 8
bolt M8
