Assembly instructions for the E- Focus:
1.
Put up the tripod (1)
2.
Assemble the E- Focus (2) on the tripod
3.
Fasten the Focus reflector (4) to the E- Focus and open the red shutter lever (3).
Now introduce the open reflector clamped to the retaining ring into the umbrella
holder and close the red shutter lever
4.
Bolt together the lamp body (7) with the spacer (6) and turn the red knob (5) to the
left until the spacer is able to fit through the E- Focus from behind, then shove the
lamp head until it rests on the E- Focus
5.
Turn the red control knob to the right, until the lamp head cannot be pulled out by
hand anymore
6.
The plug on the coiled cord (12) is plugged into the socket provided on the lamp
body, and secured with a cap nut
I
mportant
! The connector must be easy to insert into the socket on the lamp head,
pay attention to the coding (13) ! Do not use force.
7.
Now move the ring with stop device (8) from the open side of the reflector over the
spacer
8.
Stick the bulb (9) in the spacer and snap the glass cylinder (10), until it is no longer
deductible. Now add the counterlight reflector (11)
9.
Program the E- Focus and the transmitter
