Bridgeworks Oresund FCE102200, Руководство пользователя

Страница: 29 / 64

Note: It is recommended to leave Hard AL_PA unchecked unless you are
conversant with the lower levels of the Fibre Channel protocol, as certain
AL_PA addresses are reserved.
The Enable tERP check box, which is only present for 8Gb/s cards, will enable or disable the Target
Error Recovery Protocol for the port. tERP will attempt to recover frames that are missed or time
out during transfer. For tERP to correctly function, the connected initiator must also support tERP.
Clicking Save will save the configuration to memory for use at the next reboot.
Connected Hosts
To list which hosts are connected to the Gateway, select a port under Fibre Channel Interfaces ,
then select the icon labelled View all the Fibre Channel initiators which have logged into this target
port . The following will then be displayed:
Port Map
The Port Map page allows the administrator to assign devices to Fibre Channel ports with a fixed
Logic Unit Number (LUN).
Once the Fibre Channel interface has been configured, the target devices can be assigned to the
Fibre Channel ports.
From the Fibre Channel Target Management Console page select the Port Map icon.
29