Fibre Channel Speed
OM1
OM2
OM3
2Gb/s
150m
150m
150m
4Gb/s
70m
150m
150m
8Gb/s
50m
150m
16GB/s
100m
Connect your host to a target port and your device (such as a tape drive) to an initiator port.
Note: By default WANrockIT units have the left hand port (Port A) as the
target port and the right hand port (Port B) as the initiator port.
When the multi-mode cables are inserted in to the SFP, a “click” should be heard.
Connecting the Power Supply
Important: Before connecting the power cord, ensure that the wall or rack
plug is removed or is switched off.
With a redundant power supply configuration, the system evenly distributes power across both
power supplies to maximise efficiency. In order to utilise this feature, please ensure that both power
supplies are connected.
Connect the power supply to the rear of the Appliance as shown below and turn on the power from
the wall socket.
Note: Before powering up the Appliance, ensure that all peripherals and
interfaces are properly connected and are powered up.
14
