Bridgeworks a203, Руководство по оборудованию

Страница: 8 / 18

Installing the Appliance
The following are the basic steps to installing the Appliance:
• Connecting the Ethernet Interface
• Connecting the 10Gb Ethernet Cables *
• Connecting the 6Gb SAS cables *
• Connecting the 12Gb SAS cables *
• Connecting the Fibre Channel Interface *
• Connecting the Power Supply
*If an appropriate feature card is installed.
Appliance Configuration
The following image is a representation of the back of the Appliance and can be used to identify the
positions of the various feature cards available on your product.
Product Onboard Ports MA and MB Onboard Ports 8A and 8B
WANrockIT 400 Management WAN
WANrockIT 800 Management WAN
PORTrockIT 400 Management WAN
PORTrockIT 800 Management WAN
All other slots will contain feature cards chosen at time of purchase.
Connecting the Ethernet Interface
The onboard Ethernet interfaces on the Appliance can be used on the following network configurations:
• 10BASE-T
• 100BASE-T
• 1000BASE-T (Gigabit)
8