Bridgeview BALE KING 5300 Series Скачать руководство пользователя

Страница: 5 / 105

Bridgeview Manufacturing Inc.

INTRODUCTION

Thank you for purchasing a

Bale King

bale processor. With the proper operation and service as

outlined in this manual, the Bale King will provide you with years of trouble-free operation.

This is a complete safety, operation and parts manual for the Bale King 5300. The manual

covers in detail how to safely and effectively use your new processor. The procedures outlined in

this manual should be followed to ensure safe operation and longevity of your machine. The parts

manual covers all parts you may need to order in case of accident or breakdown. Please read

completely through this manual before beginning operation of your new machine.

Safety Precautions

The following safety precautions MUST be followed to ensure safe operation of the Bale King
bale processor.

•

ALWAYS

turn

OFF

the tractor when leaving the operating platform.

•

DO NOT

stand in front of the discharge chute while the machine is running.

•

DO NOT

walk or move under the bale forks when they are in the upward position, unless

the cylinder safety lock is in place.

•

DO NOT

enter the machine while in operation.

•

DO NOT

clean machine while in operation.

•

DO NOT

stick any device into the machine to clear debris while the machine is in

operation.

•

ALWAYS

turn off the machine when cleaning the machine, removing twine, or

hooking/unhooking the machine

•

ALWAYS

use safety chain when towing the machine on a highway.

•

DO NOT

operate if any part of the

PTO safety shielding

is missing or is not secured.

Содержание BALE KING 5300 Series










































































































Результаты поиска

Содержание BALE KING 5300 Series

Отзывы:

Похожие инструкции для BALE KING 5300 Series

Бренды по названию

Популярные бренды

Bridgeview BALE KING 5300 Series, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание BALE KING 5300 Series

Отзывы:

Похожие инструкции для BALE KING 5300 Series

Бренды по названию

Популярные бренды