Copyright © Bridgetek Pte Ltd
10
LDSBus Multi Sensor Datasheet
Version 1.0
Document Reference No.: BRT_000360 Clearance No.: BRT#181
3.
Prepare the ceiling and route the RJ12-JST cable through the ceiling opening. Run the LDSBus
RJ12-JST cable through the centre (hole) of the back cover and fasten the back cover to the
ceiling with self-tapping screws as shown in the picture below -
4.
Attach the cable to the JST connector of the sensor.
5.
Twist lock the front face, in a clockwise direction, to attach it to the back cover.
7.2
Swivel Mount
The swivel mount is shown in Figure 8.
Figure 8 – LDSBus Multi Sensor - Swivel Mount – Top & Bottom View
Follow these steps to fix the swivel mount –
1.
Choose the position for the wall mount and drill holes for mounting the swivel mount on the wall.
2.
Route and affix the LDSBus RJ11 cable on the wall through a buried or wall mounted conduit to
butt against the base of the swivel mount.
Top View
Bottom View
